Solar Scanner
Rooftop & Vacant-Land Solar Potential · Live

See how much solar any city could hold — read straight from the map.

Type a place and this scans every building footprint and open plot inside the survey radius, then estimates the installable rooftop solar capacity, annual generation and economics — using free, open data and no API keys. Works worldwide; accuracy follows local OpenStreetMap coverage.

Try
Starting…
Locate
Imagery
Rooftops
Land use
Solar yield
Satellite imagery
Rooftop & Land Solar Scan

—

—
Roofs read from OpenStreetMap
— buildings · — km radius
Roof size → solar host quality
X-large (>2000 m²)
Large (500–2000)
Medium (150–500)
Small (50–150)
Tiny (<50)
—MWp rooftop potential
Estimated installable solar capacity across all detected rooftops in the survey area.
01

Rooftop solar potential

Headline results across every detected roof, using the assumptions below. Adjust them and everything updates live.

Installable capacity
—MWp
—
Annual generation
—GWh/yr
—
Homes powered
—
—
CO₂ avoided
—kt/yr
vs grid electricity
02

Assumptions & economics

Every figure is driven by these levers. Defaults reflect typical rooftop practice — tune them to your market.

Usable roof fraction70%
Share of footprint usable after shading, tanks, setbacks and access.
Area per kWp10.0 m²
Roof area per kWp of panels (~10 m²/kWp typical mono-PERC).
Specific yield— kWh/kWp
From NASA POWER irradiance for this location × performance ratio.
Installed cost (CAPEX)₹45,000/kWp
All-in installed cost per kWp.
Electricity tariff₹6.50/kWh
Value of each kWh generated (offset or sold).
Total investment potential₹—Cr
Annual energy value₹—Cr
Simple payback—yrs
Area-based screening potential, not a site-verified engineering estimate.
03

Where the roof area is

Larger roofs — institutional, commercial, apartment blocks — are the strongest solar hosts. Bars show share of total detected roof area.

04

Land solar potential

Ground-mount potential inside the survey area, from OpenStreetMap land use. Total = open land + agricultural (agri-PV).

Vacant / open land
—ha
Scrub, grass and undeveloped plots — available for ground-mount.
— MWp
Under construction
—ha
Actively being built on — future rooftop stock, not available now.
Not counted
Agricultural land
—ha
Cropland — solar only via agrivoltaics (dual-use with crops). Policy-restricted; an upper bound.
— MWp agri-PV
—
05

How this was built

Live from free, open datasets — no paid API keys.

Data sources

LocationOpenStreetMap Nominatim (live geocode)
Rooftop footprintsOpenStreetMap via Overpass (live)
Land use / vacant landOpenStreetMap via Overpass (live)
Solar irradianceNASA POWER climatology
Satellite basemapESRI World Imagery (key-free)

Method

  • Building polygons pulled live and their true ground area computed by geodesic formula (not pixel counts).
  • Roof area → capacity via usable-fraction and area-per-kWp; capacity → energy via location irradiance × performance ratio.
  • Land use classified into developable / construction / cropland from OSM tags.
  • Everything recomputes instantly from the assumption sliders.
The one big caveat — completeness. This reads OpenStreetMap, whose building coverage varies by place: near-complete in well-mapped cities, sparse in others. Where OSM is thin, the roof total is an under-estimate (a floor). The building count in the header tells you how much was found — sanity-check it against the satellite image. Footprint ≈ ground area; roof usability is the slider, not per-roof tilt/shading modelling. Structural roof strength and grid-hosting capacity are not assessed. Treat as screening-level potential to prioritise, then verify on the ground.