Solar ScannerPRO
Interactive Rooftop & Land Solar Studio · Live

Scan a city, then click any roof or draw any plot to size its solar.

Search a place to map every building and estimate its rooftop solar potential. Then switch to the interactive map: click a detected roof to see its individual output, or draw a polygon over any roof or open plot to size a specific project. Build a list of sites and export it as CSV or a printable PDF. Free open data, no API keys.

Try
Starting…
Locate
Rooftops
Land use
Solar yield
Roof size
>2000 m²
500–2000
150–500
50–150
<50

—

—
Rooftop capacity
—MWp
—
Annual generation
—GWh/yr
—
Homes powered
—
—
CO₂ avoided
—kt/yr
vs grid
Ground-mount land potential
Total land
— MWp
Open land · — ha
— MWp
Agricultural · — ha
— MWp
—

Assumptions

Usable roof fraction70%
Footprint usable after shading, tanks, setbacks, access.
Area per kWp10.0 m²
Roof area per kWp (~10 m²/kWp typical).
Specific yield— kWh/kWp
NASA POWER irradiance × performance ratio.
Ground-mount density2.0 ha/MWp
Land per MWp for drawn open-land plots.
Installed cost₹45,000/kWp
All-in CAPEX per kWp.
Electricity tariff₹6.50/kWh
Value per kWh generated.

Roof area by size

solar host quality

My sites

0 selected
Capacity
0 kWp
Generation
0 MWh/yr
Value/yr
₹0
☀️
No sites yet.
Click a roof on the map, or use Draw plot to trace any roof or open plot. Each saved site gets a full Report ↗ proposal.
How this works & limitations

Data (live, free, no keys)

  • Location: OpenStreetMap Nominatim
  • Rooftops & land: OpenStreetMap via Overpass
  • Solar irradiance: NASA POWER climatology
  • Satellite basemap: ESRI World Imagery

Method

  • Building polygons → true ground area (geodesic), classed by size.
  • Area → capacity (usable-fraction ÷ area-per-kWp) → energy (× yield).
  • Drawn plots: rooftop uses the roof model; open land uses ground-mount density.
  • Everything recomputes from the sliders.
Completeness = OpenStreetMap. Building coverage varies by place — near-complete in well-mapped cities, sparse elsewhere. Where OSM is thin the city roof total is an under-estimate; the header building count vs the satellite view tells you how much was found. Drawing your own polygons sidesteps this — trace exactly what you see. Screening-level only: footprint ≈ ground area, roof usability is the slider, and roof structure / grid-hosting are not assessed.